Blog

exterior and interior basement waterproofing

Exterior and interior basement waterproofing are a vital part of the home’s structural integrity. Groundwater is one of the most important sources of moisture throughout the planet, and that moisture can do a lot of damage to the foundation of your home in the form of hydrostatic pressure. Hydrostatic pressure is the force that compresses the soil on the surface of your foundation, creating an impermeable barrier against groundwater. Waterproofing your foundation protects your home against that pressure, as well as from structural deterioration due to leaks.

Interior basement waterproofing is also necessary because it can reduce the amount of stress on your foundation. Prolonged standing water inside a basement causes the floor to expand and contract, which has an enormous effect on the structural framing around your foundation. That expansion and contraction cause cracks to appear in your foundation, which is a significant safety concern. Large cracks can compromise the integrity of the foundation or the framing around it. If the damage is not addressed right away, the cracks can spread and weaken the foundation over time.

Concrete is a good material to use for waterproofing because it is extremely durable. Concrete provides excellent resistance to hydrostatic pressure and contains tiny pores that make water evaporation difficult. If you combine concrete with a waterproof liner, you can greatly reduce the rate at which water infiltrates your foundation. Also, waterproofing does not affect the quality of the building materials used in your home’s construction, which is extremely important if you want your building materials to last a long time.

Unfortunately, exterior and interior basement waterproofing are not the only options for reducing foundation wall cracks. Severe weather can also cause cracks in your walls, so it is absolutely necessary to repair these problems as soon as possible. A leaky roof can contribute to water infiltration since it does not allow vapor to escape. Heavy rains can also cause damage to your home’s interior by damaging the wood framing and moisture can set in under the shingles on your roof.

Poor interior window well drains can also contribute to moisture buildup. The drainage system in the house removes excess moisture from the inside through the doors, windows, and skylights. If the window wells drain improperly, this liquid can seep into the base of the house and create foundation wall cracks. This can be avoided by installing well drains wherever possible. The most effective drainage systems are installed around the foundation, under the floor, around the garage, and in the exterior walls.

Exterior wall lining materials are another option to consider when dealing with water penetration. While many waterproofing contractors will suggest the use of concrete waterproof, this is a very expensive product that does little to prevent water from getting inside your walls. It is better to go with a non-permeable membrane such as gravel or an interlocking spray surface. These products do not contain sand and are therefore more affordable. They also work better in preventing frost heaves, because they can stop the water from flowing freely across your walls. In addition, they are more efficient at keeping the moisture out than concrete waterproofers.

Did you know that if you do not waterproof your basement before you finish the concrete staining or painting that you will be in trouble? Most people think that waterproofing only happens after painting and staining. That is not true. Waterproofing can be done while you are finishing a basement project.

Waterproof Your Basement Before You Finish

 

If you want a clean and dry basement, then waterproofing should take place during the planning stages of the project. It doesn’t matter if you are doing the basement yourself or having someone else finish it for you. The only difference is that the process will be a little longer and more expensive.

Most basement waterproofing projects are started by applying concrete staining or painting to the outside of the concrete basement walls. Once that is finished, the next step is to apply exterior waterproofing products like paint or sealants to the interior of the concrete walls. These are not very effective if they are just used as a beginning stage of the project.

Waterproofing the interior of the concrete is easier than the exterior because this area is actually smaller. You do not have as many seams where water can accumulate. You also have to be careful about getting the first couple of coats on the interior of the concrete too wet. A little water will not hurt anything but getting water on the interior surfaces will make it much harder to seal the concrete properly.

After the first couple of coats of waterproofing products, you will then move on to staining the rest of the concrete. There are two options available to you here. You can use a stain and leave the stains in place, or you can use either a stencil or a roller or brush and move the stain around while it dries so that you can smooth out any bumps in the staining. Stencils work better for areas that you are planning to keep relatively clean because a roller or brush will likely get all the dirt and dust on the staining.

To complete your basement waterproofing project, the exterior walls need to be sealed and the inside dampened. This usually requires the services of a professional waterproofing company. You can complete your basement waterproofing project yourself, but this will take a lot more time and effort. If you want to get your basement finished sooner, hire a professional waterproofing company to get the job done right.

In recent times the use of basement insulation has been seen as a good way to keep heating bills low. The concrete, brickwork, plaster and gypsum are usually used for the purpose of holding the interior layer of the walls in place, thereby reducing heat loss. But there are other ways in which you can achieve better insulation in your basement, without having to compromise aesthetics. Here is Basement Insulation Tips for Saving You Money and Time

Basement Insulation Tips

In order to help you understand some of the Basement Insulation Tips available, it is important to first understand what R Values are and how they can be used to make sure that your walls are properly insulated. The R Value, which is an indication of thermal resistance, is usually expressed as a percentage. If a wall has a high R Value, it will stand the test of time and resist high temperatures from water, etc. However, a wall with a low R Value may need to be repaired or repainted in order to maintain its effectiveness.

One of the main Basement Insulation Tips involves the use of materials that have a high R-value. For instance, drywall and gypsum boards do not have the same R Value so they are not recommended as insulation. Drywall and gypsum also do not insulate effectively so they should not be used on all the walls in your basement. One of the best Basement Insulation Tips for insulating basement walls involves the use of concrete blocks.

Concrete blocks are excellent materials if you want to insulate your basement effectively and add significant heat loss. The problem with blocks is that they take a long time to set up. Also, it takes a lot of effort to remove them once you have completed setting up your basement. On top of that, the cost of installing these materials is much higher than some other options. But if you are willing to put in the effort and want to save money, concrete is an excellent choice for insulating your basement.

The most important Basement Insulation Tips involve the decision of whether or not you are better off using drywall for your Basement Insulation Project. This choice is dictated by the amount of time it will take to install the material. Also, many local building codes do not require drywall for insulating basement walls. Finally, if you choose to include insulation in your Basement Project, it will likely have to be sprayed onto the entire area to be insulated.

If you are looking for good insulation material for insulating basement walls, concrete is an excellent choice. The time and effort required to install concrete in your basement will save you a great deal of money and make the project more manageable. Another reason that concrete is a great insulation choice is that it is very stable. You can even add it to existing concrete walls to increase the insulation level. And finally, if you choose to include insulation in your Basement Insulation Project, the project will almost always require a permit from your local government.

Modern Basement Ideas from Floor to Ceiling

Modern Basement Ideas from Floor to Ceiling has taken concrete blocking to a new level. Concrete concreting has been the traditional method of construction for basements and garages, but with increasing concerns about the environment and home energy efficiency, many homeowners are turning to other construction methods such as concrete staining and wall coating for modern basement ideas from floor to ceiling. Stained concrete is a technique where colored pigments are added to the concrete itself, creating a color that mirrors what is naturally found in the concrete. Concrete staining also prevents the concrete from drying out and cracking by acting as an insulator, thus making the staining much less expensive over the life of the concrete itself.

Stained concrete staining comes in different colors to match the existing decor of the house, and will not mar the surface of your new floor or garage. The concrete staining process is relatively quick and easy, requiring only a few days to complete a single project. Using a stencil or painting pad, the homeowner simply transfers paint or stains to the surface of the concrete. Concrete staining is also an excellent option if you are looking to imitate another material on the same material, such as the look of wooden planks. Wood is also an excellent option for a room like a bathroom, as it is nonporous and very durable.

The possibilities of using concrete staining extend far beyond the home. Concrete staining is also used on the outside of swimming pools, patios and retaining walls, and even sidewalks. If you have an empty garage in your yard, concrete staining can turn it into a great craft project, making any plain wall into an interesting place to hang things. You can easily create a concrete poolside by applying a thin transparent coating to the wall and leaving it to dry while you add your personal touch with paint or stains.

Concrete retaining walls are another of the concrete home design ideas that are becoming popular. Retaining walls are not just plain concrete panels that are painted a certain color. In fact, concrete retaining walls can be used in many different ways, depending on your preferences. For instance, you might want to build an ornate retaining wall filled with flowers and plants in your front yard. You could choose concrete pavers to line your retaining wall, or you might choose to leave the area clear and empty, leaving the floor to serve as a focal point for your front yard.

The possibilities of using concrete in your basement are only limited by your imagination. There are concrete pavers available that you can use to create a unique design that will make your basement feel like a whole new space. Whatever type of concrete you decide to use in your basement, remember to pick one that is treated so that it will be able to withstand mildew and chlorine. That way, your concrete will be able to stay fresh and new for years to come!

These are just a few of the modern basement design ideas that are available to you. Of course, if you do not have the budget for an elaborate basement remodel, then there are plenty of simple ways to update your basement without spending a lot of money. For instance, adding new flooring to your basement can change the appearance drastically. Carpeting is an easy way to add a new look to any room in the house, especially if you are looking for something that will not be too expensive. You can find great deals on carpeting at most home improvement stores, so it should not be hard to find the type of flooring that you are looking for.