What You Need to Know About Exterior and Interior Basement Waterproofing?

exterior and interior basement waterproofing

Exterior and interior basement waterproofing are a vital part of the home's structural integrity. Groundwater is one of the most important sources of moisture throughout the planet, and that moisture can do a lot of damage to the foundation of your home in the form of hydrostatic pressure. Hydrostatic pressure is the force that compresses the soil on the surface of your foundation, creating an impermeable barrier against groundwater. Waterproofing your foundation protects your home against that pressure, as well as from structural deterioration due to leaks.

Interior basement waterproofing is also necessary because it can reduce the amount of stress on your foundation. Prolonged standing water inside a basement causes the floor to expand and contract, which has an enormous effect on the structural framing around your foundation. That expansion and contraction cause cracks to appear in your foundation, which is a significant safety concern. Large cracks can compromise the integrity of the foundation or the framing around it. If the damage is not addressed right away, the cracks can spread and weaken the foundation over time.

Concrete is a good material to use for waterproofing because it is extremely durable. Concrete provides excellent resistance to hydrostatic pressure and contains tiny pores that make water evaporation difficult. If you combine concrete with a waterproof liner, you can greatly reduce the rate at which water infiltrates your foundation. Also, waterproofing does not affect the quality of the building materials used in your home's construction, which is extremely important if you want your building materials to last a long time.

Unfortunately, exterior and interior basement waterproofing are not the only options for reducing foundation wall cracks. Severe weather can also cause cracks in your walls, so it is absolutely necessary to repair these problems as soon as possible. A leaky roof can contribute to water infiltration since it does not allow vapor to escape. Heavy rains can also cause damage to your home's interior by damaging the wood framing and moisture can set in under the shingles on your roof.

Poor interior window well drains can also contribute to moisture buildup. The drainage system in the house removes excess moisture from the inside through the doors, windows, and skylights. If the window wells drain improperly, this liquid can seep into the base of the house and create foundation wall cracks. This can be avoided by installing well drains wherever possible. The most effective drainage systems are installed around the foundation, under the floor, around the garage, and in the exterior walls.

Exterior wall lining materials are another option to consider when dealing with water penetration. While many waterproofing contractors will suggest the use of concrete waterproof, this is a very expensive product that does little to prevent water from getting inside your walls. It is better to go with a non-permeable membrane such as gravel or an interlocking spray surface. These products do not contain sand and are therefore more affordable. They also work better in preventing frost heaves, because they can stop the water from flowing freely across your walls. In addition, they are more efficient at keeping the moisture out than concrete waterproofers.

exterior and interior basement waterproofing

Exterior and interior basement waterproofing are a vital part of the home’s structural integrity. Groundwater is one of the most important sources of moisture throughout the planet, and that moisture can do a lot of damage to the foundation of your home in the form of hydrostatic pressure. Hydrostatic pressure is the force that compresses the soil on the surface of your foundation, creating an impermeable barrier against groundwater. Waterproofing your foundation protects your home against that pressure, as well as from structural deterioration due to leaks.

Interior basement waterproofing is also necessary because it can reduce the amount of stress on your foundation. Prolonged standing water inside a basement causes the floor to expand and contract, which has an enormous effect on the structural framing around your foundation. That expansion and contraction cause cracks to appear in your foundation, which is a significant safety concern. Large cracks can compromise the integrity of the foundation or the framing around it. If the damage is not addressed right away, the cracks can spread and weaken the foundation over time.

Concrete is a good material to use for waterproofing because it is extremely durable. Concrete provides excellent resistance to hydrostatic pressure and contains tiny pores that make water evaporation difficult. If you combine concrete with a waterproof liner, you can greatly reduce the rate at which water infiltrates your foundation. Also, waterproofing does not affect the quality of the building materials used in your home’s construction, which is extremely important if you want your building materials to last a long time.

Unfortunately, exterior and interior basement waterproofing are not the only options for reducing foundation wall cracks. Severe weather can also cause cracks in your walls, so it is absolutely necessary to repair these problems as soon as possible. A leaky roof can contribute to water infiltration since it does not allow vapor to escape. Heavy rains can also cause damage to your home’s interior by damaging the wood framing and moisture can set in under the shingles on your roof.

Poor interior window well drains can also contribute to moisture buildup. The drainage system in the house removes excess moisture from the inside through the doors, windows, and skylights. If the window wells drain improperly, this liquid can seep into the base of the house and create foundation wall cracks. This can be avoided by installing well drains wherever possible. The most effective drainage systems are installed around the foundation, under the floor, around the garage, and in the exterior walls.

Exterior wall lining materials are another option to consider when dealing with water penetration. While many waterproofing contractors will suggest the use of concrete waterproof, this is a very expensive product that does little to prevent water from getting inside your walls. It is better to go with a non-permeable membrane such as gravel or an interlocking spray surface. These products do not contain sand and are therefore more affordable. They also work better in preventing frost heaves, because they can stop the water from flowing freely across your walls. In addition, they are more efficient at keeping the moisture out than concrete waterproofers.

Did you know that if you do not waterproof your basement before you finish the concrete staining or painting that you will be in trouble? Most people think that waterproofing only happens after painting and staining. That is not true. Waterproofing can be done while you are finishing a basement project.

Waterproof Your Basement Before You Finish

 

If you want a clean and dry basement, then waterproofing should take place during the planning stages of the project. It doesn’t matter if you are doing the basement yourself or having someone else finish it for you. The only difference is that the process will be a little longer and more expensive.

Most basement waterproofing projects are started by applying concrete staining or painting to the outside of the concrete basement walls. Once that is finished, the next step is to apply exterior waterproofing products like paint or sealants to the interior of the concrete walls. These are not very effective if they are just used as a beginning stage of the project.

Waterproofing the interior of the concrete is easier than the exterior because this area is actually smaller. You do not have as many seams where water can accumulate. You also have to be careful about getting the first couple of coats on the interior of the concrete too wet. A little water will not hurt anything but getting water on the interior surfaces will make it much harder to seal the concrete properly.

After the first couple of coats of waterproofing products, you will then move on to staining the rest of the concrete. There are two options available to you here. You can use a stain and leave the stains in place, or you can use either a stencil or a roller or brush and move the stain around while it dries so that you can smooth out any bumps in the staining. Stencils work better for areas that you are planning to keep relatively clean because a roller or brush will likely get all the dirt and dust on the staining.

To complete your basement waterproofing project, the exterior walls need to be sealed and the inside dampened. This usually requires the services of a professional waterproofing company. You can complete your basement waterproofing project yourself, but this will take a lot more time and effort. If you want to get your basement finished sooner, hire a professional waterproofing company to get the job done right.

In recent times the use of basement insulation has been seen as a good way to keep heating bills low. The concrete, brickwork, plaster and gypsum are usually used for the purpose of holding the interior layer of the walls in place, thereby reducing heat loss. But there are other ways in which you can achieve better insulation in your basement, without having to compromise aesthetics. Here is Basement Insulation Tips for Saving You Money and Time

Basement Insulation Tips

In order to help you understand some of the Basement Insulation Tips available, it is important to first understand what R Values are and how they can be used to make sure that your walls are properly insulated. The R Value, which is an indication of thermal resistance, is usually expressed as a percentage. If a wall has a high R Value, it will stand the test of time and resist high temperatures from water, etc. However, a wall with a low R Value may need to be repaired or repainted in order to maintain its effectiveness.

One of the main Basement Insulation Tips involves the use of materials that have a high R-value. For instance, drywall and gypsum boards do not have the same R Value so they are not recommended as insulation. Drywall and gypsum also do not insulate effectively so they should not be used on all the walls in your basement. One of the best Basement Insulation Tips for insulating basement walls involves the use of concrete blocks.

Concrete blocks are excellent materials if you want to insulate your basement effectively and add significant heat loss. The problem with blocks is that they take a long time to set up. Also, it takes a lot of effort to remove them once you have completed setting up your basement. On top of that, the cost of installing these materials is much higher than some other options. But if you are willing to put in the effort and want to save money, concrete is an excellent choice for insulating your basement.

The most important Basement Insulation Tips involve the decision of whether or not you are better off using drywall for your Basement Insulation Project. This choice is dictated by the amount of time it will take to install the material. Also, many local building codes do not require drywall for insulating basement walls. Finally, if you choose to include insulation in your Basement Project, it will likely have to be sprayed onto the entire area to be insulated.

If you are looking for good insulation material for insulating basement walls, concrete is an excellent choice. The time and effort required to install concrete in your basement will save you a great deal of money and make the project more manageable. Another reason that concrete is a great insulation choice is that it is very stable. You can even add it to existing concrete walls to increase the insulation level. And finally, if you choose to include insulation in your Basement Insulation Project, the project will almost always require a permit from your local government.

Modern Basement Ideas from Floor to Ceiling

Modern Basement Ideas from Floor to Ceiling has taken concrete blocking to a new level. Concrete concreting has been the traditional method of construction for basements and garages, but with increasing concerns about the environment and home energy efficiency, many homeowners are turning to other construction methods such as concrete staining and wall coating for modern basement ideas from floor to ceiling. Stained concrete is a technique where colored pigments are added to the concrete itself, creating a color that mirrors what is naturally found in the concrete. Concrete staining also prevents the concrete from drying out and cracking by acting as an insulator, thus making the staining much less expensive over the life of the concrete itself.

Stained concrete staining comes in different colors to match the existing decor of the house, and will not mar the surface of your new floor or garage. The concrete staining process is relatively quick and easy, requiring only a few days to complete a single project. Using a stencil or painting pad, the homeowner simply transfers paint or stains to the surface of the concrete. Concrete staining is also an excellent option if you are looking to imitate another material on the same material, such as the look of wooden planks. Wood is also an excellent option for a room like a bathroom, as it is nonporous and very durable.

The possibilities of using concrete staining extend far beyond the home. Concrete staining is also used on the outside of swimming pools, patios and retaining walls, and even sidewalks. If you have an empty garage in your yard, concrete staining can turn it into a great craft project, making any plain wall into an interesting place to hang things. You can easily create a concrete poolside by applying a thin transparent coating to the wall and leaving it to dry while you add your personal touch with paint or stains.

Concrete retaining walls are another of the concrete home design ideas that are becoming popular. Retaining walls are not just plain concrete panels that are painted a certain color. In fact, concrete retaining walls can be used in many different ways, depending on your preferences. For instance, you might want to build an ornate retaining wall filled with flowers and plants in your front yard. You could choose concrete pavers to line your retaining wall, or you might choose to leave the area clear and empty, leaving the floor to serve as a focal point for your front yard.

The possibilities of using concrete in your basement are only limited by your imagination. There are concrete pavers available that you can use to create a unique design that will make your basement feel like a whole new space. Whatever type of concrete you decide to use in your basement, remember to pick one that is treated so that it will be able to withstand mildew and chlorine. That way, your concrete will be able to stay fresh and new for years to come!

These are just a few of the modern basement design ideas that are available to you. Of course, if you do not have the budget for an elaborate basement remodel, then there are plenty of simple ways to update your basement without spending a lot of money. For instance, adding new flooring to your basement can change the appearance drastically. Carpeting is an easy way to add a new look to any room in the house, especially if you are looking for something that will not be too expensive. You can find great deals on carpeting at most home improvement stores, so it should not be hard to find the type of flooring that you are looking for.

Plumbing

Whether you are going to get the old houses for investments or maintaining your grandparent old houses, you may notice some of the problems including plumbing issues.

In old houses, plumbing problems are common challenges. It is hard to notice hidden leaks until it is too late. Usually, you might see it through your water billing which is more expensive than the previous billing or noticing the property damages, or other signs like walls stains, odors, dirt, and leaks.

 

Hiring experts for a plumbing inspection to help you to find out the real root problems.

 

The professional plumbing inspections will help you to cover all of the bases. The plumbing things will be checked by them from the pipes under your house, to the water heating testing to find out the sources of leaking.

The professional plumbing inspector will explore and check all of the points where the water runs in your house. Keep in mind that you can only hire the professional plumbing inspector for preventative measures. It won’t be a good point to invite them when the problems already happen. If that’s the case, the ones you should call are the professional plumbers to fix your plumbing system.

The cost of cleaning up water damage can be around a thousand bucks to five thousand bucks, depending on the size of the problems.

 

Here are the possible things that are found by your professional plumbing inspector:

 

Clogging

It is one of the most common problems you will find during the inspection. Clogging can be because of the soap scum, gunk, or sewage. The older house has decades of experience.

Pipe belly

The other thing to check is the pipe belly formation. After settling for years, it is possible that your older pipes become buckled. This could explain why it is not good at directing the water from the sewer line. 

Sewer lines problem

The sewer lines in the old building can have a problem in their part because of the tree root intrusion. It can cause the sewage to back up. The inspector will be able to find the root problem of this.

Metal corrosion

In older buildings, it is possible that the pipe’s qualities have been affected. It is because the zinc which coats the pipes can erode as time goes by. The coat could expose the iron to the water. You know what will happen when the iron contacts with the water for a long time. It can eventually rust and affect plumbing quality.

Why should you inspect the older house plumbing?

 

There is a good reason why house plumbing inspection is necessary when it comes to the older house.  

If you think about the long term investment, the inspection is necessary to make sure that you are buying a good property. Not to mention that the inspection is one of the most important terms of selling or buying a house.

You might notice if the water pressure decreases. The water flow restrictions are the sign of a plumbing problem. Preventing it from worsening can save you a lot of time and money to spend in the future.

Having a shower can improve your home experience. Everybody will be comfortably reaping the benefits of the shower. But to make sure that the showering experience is not tarnished, you will need to pay attention to the maintenance.

The leaking shower valve is one of the most common problems that you might experience. The thing is that not all homeowners realize this problem and the underlying causes of it. When it is left untreated, the leaking shower valve can affect the walls and plumbing fixtures.

Shower leaks behind the wall can do internal damage if you don’t do preventative measures at first.

Shower Leak

The signs that you should notice

  • The shower leaks are not easy to notice if you have an unusual house building. It is important to be meticulous in inspecting the possible problem that happens behind your wall.
  • The basement is prone to shower leaks. And it should be easy to track. You can easily see the signs of shower leaks in your basement. The water movement is the key to track the problems.
  • The other noticeable sign is the water stains. You might notice the dried water stains on the ceiling below the shower fixture.
  • And when someone uses your shower system, you will be able to see the dripping of the water if the shower leaks.
  • The shower valve leaks behind the wall are not quick and noticeable at a glance because the stream is very slow. Therefore, meticulous inspection is necessary to make sure that you explore all of the possibilities.
  • The sign of shower leak behind the wall is drywall or the parts in the valve become spongy. It is the result of the accumulation of leak that happens in the back of the wall.

Locate the leaking

It is tricky to troubleshoot the leaks that happen behind the wall. Most of the time, you cannot really tell if the shower leaks or not because you can only see the front side of your shower.

But don’t worry. You can handle this problem. You can simply remove the shower plate to see if you have the chance to inspect the connections of the valve. If you can, then it is great. but if the case enforces you to break the wall behind the valve, you might want to get help from your professional inspector for this task.

It is good news if the past builders installed an access panel in the wall. If there is an access panel, you can easily inspect and repair the water pipes by yourself. But if there is no access panel, the inspection will be harder to conduct. In this case, calling the professionals will help you a lot in solving the problems.

When you notice the leaking shower valve, fixing it to stop the shower leaks behind the wall can be a bit trickier.

But here is a good thing. Most brands on the market come with a similar design so that it would be easy to install and fix the valve.

If the valve is leaking from the stem, then you need to turn off the water and replace the cartridge. But if the leak happens in the valve body, you will need to cut it out and have it replaced. Consider to search out your professionals to help you handle this problem.

If you are going to get a property for you and your family, or for investment, you will want to check on everything before proceeding. One of the most pivotal aspects is the sewer line inspection.

Here is the thing. Not all homebuyers consider conducting sewer line inspections because they believe what they see. For instance, when you do a quick tour of a property, you might not see visible problems. But who knows, the sewer lines of the property are having problems.

It is indeed amongst the most important inspections that you need to conduct to prevent anything bad from happening.

If you find the sewer fault at the right time, you will be able to fix it faster and prevent anything worse from happening. Everything will end up great.

Sewer

Why sewer line inspection?

The home which has been standing for more than two decades should require the inspection in the sewer line. The most challenging aspect with the sewer line is the roots that can crawl into tiny openings and expand in the sewer line, affecting the property building in the worst cases.

Then there is a possibility that the homes are built before the developers built the integrated sewers in the complex. The sewer lines are definitely to be placed if the houses are more than 20 years old.

The best way to inspect the sewer line

When you set up a home inspection, the sewer line is not something you can do by yourself. The best way to inspect the sewer line is by reaching out to your nearby Redshaw Plumbing company and ask if the professionals can conduct the sewer line inspection for you. Your real estate agent indeed has good connections with the contractors. He or she would refer you to the best people who can help you.

The mature plumbing company has good resources and equipment to support their project. Gone are the days when the contractor needed to excavate all of the stuff and ended up wasting your money just to check the sewer line. 

Instead, they will use sophisticated technology like a snake small video camera which gives flexibility to the technicians and inspectors to explore the sewer line of the house.

Depending on how much area to cover, inspecting the sewer line can be finished in a day or two. And then, the inspector will come up with the results of the inspection and suggest you fix or install a newer sewer line in the property. You can also ask them about the plan to do it, the cost, and other information.

 

The cost of inspection

Each state might have a different rate of sewer line inspection.

The rate of sewer line inspection can cost anywhere from $300 to $1000. Each company might have a different rate. To have your sewer line inspected by the video, it could cost more because the inspector will need to prepare more resources at their party. But this price is a good thing. you will get the insights of the property sewer line so that you can decide whether or not to replace the sewer line. Don’t hesitate to ask for some quotes from various companies. You will eventually come across the best sewer line professional inspector for you.

Getting a damp basement is not probably one of the happiest of news possible. It is hard to locate moisture entry into a basement room and one of the most simple test is to tape a piece of aluminum foil to the inside of the walls in the basement and let it be there over night. If in the morning, there is a film of moisture accumulated on the foil, it demonstrates the presence of moisture or points to the need to take preventive steps to clear up the basement.

  1. Concrete sealants

These are typically additives to the concrete cement and brushed on to the walls along with slurry of concrete. They are rather simple to apply and it does not require much of a preparatory work either, it is even possible to brush on the slurry in the presence of a little moisture as well. But the key criterion is to have the mixture dry as fast as possible as it could have a strong bearing on the quality of seal that is formed on the mixture coating.

  1. Silicate based sealers

The silicate sealers are additives that are added to water to be brushed on to the walls outer layer. Most of the cracks and holes are sealed over by the silicate fibers which tend to create an impermeable coat over the surface. But unlike the concrete sealers, the silicate sealers can be used on surfaces that have been painted over and done to a finish. The time taken to affect a complete seal of the surface is much smaller in the case of silicate sealants.

  1. Acrylic paints

Commonly acrylic paints are seen to be used in practically most household paint works but in the case of water proofing, acrylic paints are used to form a sealant surface so that the moisture and dampness is kept out of the basement or other building parts. The main disadvantage of the acrylic paints is that it needs a completely dry surface to be applied to and takes a fair amount of time to dry out too.

If ever there were a strong point to using acrylic paints, then it has to be that there are many shades that are available in the market. Thus there is no dearth of choice and the ability to match the color to the needs of the situation.

  1. Sheets of barriers

The barrier here refers to the layers of plastic or acrylic or even metal that can be placed to prevent the ingress of water at best. Some of the barrier types are screwed onto the walls or even attached with a strong binder to prevent the seepage of water. When it comes to the actual effectiveness of the solutions, it is the quality of the binders that decide on the success of the final solution. It is here that metal sheets like aluminum come to play a strong role in the creation of the barriers.

Having a seeping basement could be one of the most distressing of experiences. Firstly, there is the issue of locating the ingress of the moisture and then comes the issue of having to isolate the seepage and turn out a dry building basement. The two actions are not complementary and needs to be tackled in a systematic manner that would ensure a complete and thorough dryness to be attained.

Dig around

When the seepage is first noticed in a building, the first step is to just dig around the area of the basement. This should expose the outer surface of the basement to the outside to make an assessment of the issue in greater detail. At times the issue could be so apparent that a simple visual perusal could turn out to be the solution that people are looking for. But instances such as these are not much and often it takes a little more of deep digging to bring into the open the issues that have been dormant in the construction. Furthermore, digging around is like an assessment that every team of tree services provider did to all aspects of their services and you can check one great example of this work preference through their website.

Applying the sealants

With water, it does not take much to create the seepage into a building. Just the tiniest of cracks is enough to set into motion the ingress of moisture. Many a times, the concrete cement could lose its cohesiveness to allow water to seep into room.

Sealants can be applied both ways, internally and externally as well. The final choice of the application is situational wise that takes into consideration the final layout of the room base. It really does not matter if the sealant is applied external to the room or internal to the space, but the greater issue of containing the ingress of moisture needs to be addressed adequately.

Another issue with sealants is that there are a number of types of sealants available in the market. The cement based ones, the epoxy ones, the polymer ones and so on.  Each type has its own individual style of application and curing process as well. Some are additives to paint and slurry while others are but stand alone mixtures that needs to be applied individually.

Using the membrane

The membrane is but an elastomeric coating that is applied to form a completely sealed in basement.  It can be applied to both the exterior and the interior of the building basements.  The strong point of the membrane is that it can smoothen over the cracks that occur later on with the shifting or movement of the structure at any time. The elastic polymer can be flexible enough to withstand mild tremors without breaking out the seal on the building.

Conclusion

Rather than use very exotic manner of application or method, it is the simplest application that would work longer and is durable too.  Treatment forms are but methods developed over time and further improvements in technology and their application is to be expected at all times. Increasingly, there has been a fair success to controlling the ingress of moisture to the basements and it is only natural that further improvements in the way solutions are applied are undertaken to the full extent.

People often think of having the basement worked when they do notice moisture accumulating at the bottom of the basement floor. But for all practical purposes, the moisture ingress into the basement can be classified as three separate causes. The internal, the external and the drainage.  It is when the issue is addressed in the right approach that the complete ingress of moisture and water into the basement gets to be controlled.

The internal drainage

By the very term, internal drainage, it signifies the seepage of water from sources that have their input from the interior of the houses or buildings. The first step is to find out the major flow source of the water and to try and block the path of the flow of water as best as possible. This can be affected by putty filling the cracks and to seal in the cracks with sealants for the most parts.

The final result must be that the basement floor must be free of moisture ingress from the interior of the house at anytime. Considering the complexity of the situation, it is never that the process of identifying the internal sources of water is going to be easy but most of the time it is a long drawn out process that needs time spend and effort expended.

External sources

At the first instance of keeping out external sources of water, the basement walls are coated with a waterproof compound so as to prevent the water from getting into the basement. This can be approached in two ways. The first is to apply sealant to the interior walls of the basement to keep out the water and the second is to remove the soil around the bottom of the building and to apply a sealant to the external surfaces.

The actual method of application depends on the situation of the repair work and never can be taken to be a rule as such. It is the thorough application of the sealant that decides how effective it is when it comes to keeping out the water.

Drainage systems

The basement normally forms the lowest part of any construction. Thus the final resting place or collection point of all drainage in a building gets to be the basement too. If there is a faulty design of drain pipes or of systems to contain the water within, then it would be reflected in the moisture or water ingress into the basement of the buildings.

With this sort of persistent drainage problem, the corrective step is to redo the drains from the scratch. The extra cost would be borne by years of trouble free service hence forth.  The thing with piece meal approach is that often sections would not match to each other and water would seep through the different joints that are thus formed at the pipes.

One of the features of drainage or seepage that has not been handled here has been that of condensate being formed on the walls, both the exterior and the interior as well. This effect must be taken into consideration when an actual basement work is being carried out.